Abbott FreeGo - Table of Contents

SETUP
What you need ____________________________________ 1
Set up the Abbott FreeGo
®
table drip stand ________ 2
PREPARATION
Prepare the Abbott FreeGo
®
pump _________________3
Plug in and turn on _______________________________ 4
THE GIVING SET
Familiarise yourself with the giving set _____________5
ATTACHING FEED
Attach giving set to the Ready to Hang
(RTH) container __________________________________7
Insert giving set cassette into pump
and prime the giving set: Auto Priming ____________ 8
Manual Priming _________________________________ 9
RATES & DOSAGES
Summary of controls and functions ______________ 10
SET RATE and SET DOSE functions ______________ 11
Connect to the feeding tube and start feeding _______12
FEED VOLUME
VOL FED and CLEAR VOL settings _______________13
CLEANING & CONTROLS
Everyday care of your pump ______________________14
ALARMS & ALERTS
OCCL ___________________________________________15
FEED EMPTY ___________________________________16
DOSE and BATTERY _____________________________ 17
PROBLEMS?
Troubleshooting guide ___________________________18
FREEGO
®
PUMP ACCESSORIES
FreeGo® Pump Drip Stand _______________________ 20
FreeGo® Pump Portable Backpacks _______________21
FreeGo® Pump Accessories ______________________ 23
Return of FreeGo Pump _________________________ 24
CONTENTS