What to do if Abbott FreeStyle Libre Reader does not power on?
If your Abbott Blood Glucose Meter Reader doesn't power on, it could be due to a low battery. Try charging the Reader. Alternatively, the Reader might be outside its operating temperature range. Move the Reader to a location where the temperature is between 10°C and 45°C and then attempt to power it on.
Why is Abbott FreeStyle Libre Blood Glucose Meter Sensor not sticking to my skin?
If the Abbott Blood Glucose Meter Sensor is not sticking to your skin, it may be because the application site is not free of dirt, oil, hair, or sweat. Remove the Sensor, clean the site with plain soap and water, consider shaving the area, and then follow the instructions in the Applying and Starting Your Sensor sections to reapply the sensor.
What to do if Abbott FreeStyle Libre does not power on?
If your Abbott Blood Glucose Meter does not power on after you press the Home Button or insert a test strip, the Reader battery might be too low; in this case, charge the Reader. Alternatively, the Reader might be outside of its operating temperature range. Move the Reader to a temperature between 10 °C and 45 °C and then try to power it on.
General| Sensor Wear Duration | 14 days |
|---|---|
| Scan Time | 1 second |
| Meter Category | Continuous Glucose Monitoring (CGM) |
| Name | FreeStyle Libre |
| Operating Temperature | 10°C to 45°C |
| Water Resistance | IP27 |
| Glucose Range | 500 mg/dL |
| Measurement Range | 500 mg/dL |
| Warm-up Time | 1 hour |
| Compatibility | FreeStyle Libre Reader |
To Next Page