OVER
Unexpected characters on the receiver display screen, unusual
or unexpected receiver screen appearance.
a. Reconnect the transmitter and receiver.
b. Insert a new sensor.
c. If this did not solve the problem, call Customer Care.
e batteries are installed correctly. If you are close to a source of
electromagnetic interference (see
Appendix C for further details),
move away from the interfering source
and see if the problem goes away. If
there is consistent interference from
a source, contact the manufacturer
of the source or a certied electrician
for help. e batteries may have to be
replaced. Replace batteries with fresh
ones and reset date and time.
e batteries are installed incorrectly. Install batteries correctly and reset date
and time.
If en
Section 10 103
Respond to Alarms, Errors, and Problems
To Next Page
Loading...
