38
Note: Do not remove the test strip from the meter or disturb it
during the countdown.
If the countdown does not start, remove and discard the used
test strip, turn off your meter, and try again with a new test strip.
5
At the end of the countdown:
• If the beeper is ON, listen for the beeper.
• The control solution result shows on the
display window.
Note: If you are doing a ketone control solution test,
KETONE will also show with the result.
• The result is stored in your meter’s
memory as a control solution result.
In your logbook, record the result as
a control solution result.
Ketone
Glucose
Control
Solution Testing
38
To Next Page
Loading...
