Abcon ProShip - Scale Functions

6 PROSHIP
®
FUNCTION
HOLD FUNCTION
OncetheHOLD button is pressed, the indicator will remain on the display for 120
secondsaftertheitemhasbeenremovedfromthescalesotheweightcaneasilyberead.
1. Place the item on the scale platform.
2. Wait for the stable indicator to be displayed.
3. Press the [HOLD] button. The HOLD hold indication will turn-on.
4. Disablingtheholdfunction:Onceanitemisweighedandtheholdfunctionisenabled
 youwanttoquittoholdfunction,pressthe[HOLD]buttonagaintocancelthe“.” hold
indicator and return the scale to weight mode.
MEASURING UNIT CHANGE / CONVERSION
BEFOREPLACINGITEMONPLATFORM:
The measuring unit (i.e. g or oz) can be chosen before placing item onto weighing platform
by pressing [UNIT] button.
WHILSTITEMISONPLATFORM(CONVERSION):
If you did not choose the desired measuring unit before placing item onto platform, it is
stillnottoolatetochange(covert)it.Simplypressthe[UNIT] button with the item still on
theplatform(orwheninHoldmode)andtheunitreadingwillbeconvertedtoyournew
chosenunit[i.e.lb:oztokg].
PROGRAMMABLE FUNCTION SETTINGS (AutoOff/AutoBacklight)
ENTERINGCHANGEFUNCTIONMODE:
Inordertochangethecurrentfunctionsettings,itisrequiredtoentertheChange
Function mode by firstly ensuring the scale is switched OFF. Then press and hold the
[ZERO] button whilst pressing the [ON/OFF] button.Nowthedisplaywillshow:-
A_ON or A_OFF
1. SELECTIONOFAUTOHOLD:
Press [UNIT] button, the display will show H_ON or H_OFF. Press [ZERO] to choose
ON or OFF, this means AUTO-HOLDfunctioniseitheractive(ON)orinaction (OFF).