Abcon ProShip - Selection of Auto Shut off Mode; Selection of Auto Backlight Mode

PROSHIP
®
7
FUNCTIONS
2. SELECTIONOFAUTOSHUTOFFMODE:
WhilstthescaleisinChangeFunctionMode,pressthe[UNIT] button until A_ON or
A_OFF is shown. Press [ZERO] to choose ON or OFF: selection display ON, this
 meansautoshutofffunctionactive.Press[ZERO] again, the display will show OFF,
 thismeansautoshutofffunctioninactive.
3. SELECTIONOFAUTOBACKLIGHTMODE:
WhilstthescaleisinChangeFunctionMode,pressthe [UNIT] button until the display
will show L_ON (or OFF). press [ZERO] to choose ON or OFF: selection display ON,
 thismeansautobacklightfunctionactive,press[ZERO] again, the display will show
OFF,thismeansautobacklightfunctionisinactive,i.e.shutoffbacklightfunction.
Press [ON/OFF] buttontoexitChangeFunctionMode.