Need help?Do you have a question about the Abell A-82 and is the answer not in the manual?
Overview of the manual's purpose and intended audience.
Defines the coverage of service information for the equipment.
Guidelines for specifying and ordering replacement components.
Essential safety guidelines for handling the equipment during service.
Explains the operation and programming of key radio functions.
Details different operating modes (User, PC, Manufacture) for realignment.
Instructions on how to access each operational mode.
Visual guide to identifying the main physical components of the radio.
Steps to remove the outer case from the main chassis.
Procedures for detaching the chassis from the internal unit.
Describes the receiver's double conversion frequency setup and PLL circuit.
Details the RF amplifier, mixer, IF, AF stages, and squelch functionality.
Explains the PLL and VCO circuits for frequency generation.
Covers audio modulation, encoders, bandwidth switching, DTMF, and power amplification.
Outlines the power distribution and voltage regulation for the device.
Describes the operation of the main CPU and its clock frequency.
Lists essential test instruments and their specifications for calibration.
Provides target frequencies for TX and RX across different channels.
Details calibration steps for frequency, power, and deviation in transmit mode.
Outlines calibration procedures for sensitivity and squelch levels.
Illustrates component placement on the A and B sides of the PCB.
To Next Page
General