Visit: www.abisupport.com
16
First attach the hydrualic hoses to your tractor. One
hose will be equipped with the speed control valve. It is
importmant that the speed control valve is attached to the
outward flow port on the tractor. Be sure the valve is open
completely to allow the lines and cylinder to fill completely
with hydraulic fluid. Once the lines and cylinder have filled,
then adjust the valve to the desired speed. Finally, check
the tractor hydraulic fluid to confirm it is still at a safe level.
Opening or closing the speed control valve will determine
how fast the rake pivots up or down with the hydraulics are
engaged. This is critical if you tractor is equipped with a
push button hydraulic system. The more closed the speed
control valve is, the slower the rake will pivot. Likewise, the
more open the speed control valve is, the faster the finish
rake will pivot.
Trevor Brazile Edition Hydraulic Finish Rake
SPEED CONTROL VALVE -
CLOCKWISE TO CLOSE AND
COUNTER-CLOCKWISE T OPEN.
SPEED CONTROL VALVE MUST BE
ATTACHED TO THE OUTWARD FLOW
PORT ON THE TRACTOR
To Next Page
Loading...