Abit AS8 - Onboard PCI Device; Power Management Setup

BIOS Setup 3-21
 EPP Mode Select:
This item selects the EPP mode.
 ECP Mode Use DMA:
This item selects the DMA channel of the parallel port.
 Onboard PCI Device:
Click <Enter> key to enter its submenu:
IEEE 1394 Controller: (For AS8 and AS8-G)
This option enables or disables the IEEE 1394 controller.
Onboard LAN Controller:
This option enables or disables the LAN controller.
 LAN Boot ROM:
This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the
local area network directly.
 Enhance Performance:
This option enhances the LAN performance by making it as the first priority among the PCI devices.
3-6. Power Management Setup
User’s Manual