Output of the results and storage
3. Output of the results and storage
The measurement results of a measurement are stored twice and (optionally) displayed
immediately after measuring.
In the file "HT-TAB. txt" all parameters of the measurements performed in the test report are
stored line by row. You can find this file at the following location
:
\*Your chosen directory*\HydroTracer Test Data\HT-Table
The purpose of this file is to provide the measurement data for further processing systems
such as Microsoft © Excel.
A “.pdf”-file is created for each stored measurement and stored in the following storage path:
\*Your chosen directory *\HydroTracer Test Data\REPORTS
The name of the ".pdf" file follows the convention "Year-Month-Day_Hour-Minute.zip". In
connection with the "HT-TAB. txt", each report can be assigned in the table.
In another folder
\*your chosen storage path*\HydroTracer Test Data\Service Data
, there is
a binary data file with the extension ".t". This is created for each test that lasts longer than
500 seconds and is also saved. These service files provide support and remote fault diagnosis
by aboni GmbH.
To Next Page
Loading...
Need help?
General
