aboni HydroTracer HT3 User Manual

Selection Menus & Status Display
28
4. Selection Menus & Status Display
4.1 Menu: Settings & Company logo
After calling up the menu "settings" from the main screen, this window appears:
(A) Selection of the program language
(B) Show HTML-Report after a test
(C) Create a further Test-Report in a second language
(D) If (C) is selected, the language can be chosen here
(E) Put the tick in the checkbox, connect the PC and the balance with the serial cable, and
switch on the balance. Then press the "Connect" button and the software connects the
balance. You will get the info window as shown in „Fehler! Verweisquelle konnte
nicht gefunden werden. Using the serial balance“
(F) Using the test pads instead of the powdered reagent, select this option.
(E)
(A)
(B)
(C)
(D)
(F)
(G)
(H)
(I)
(J)
(K)

aboni HydroTracer HT3 Specifications

General

Brand	aboni
Model	HydroTracer HT3
Category	Measuring Instruments
Language	English