45
English
DEVICE DESCRIPTION AND PARTS
1) LED display
2) Safety sleeve on handle
3) Activation handle
4) Protective cap
5) ABS
®
P.RIDE inflator
6) Venturi nozzle
7) Release flap
8) USB charging cable
9) Airbag compartments
10) Control module
11) Installed Venturi nozzles
12) Function key
13) Chest strap
14) Hip strap
15) Leg strap
2. WARNING NOTICES AND
APPROPRIATE USE
a The ABS
®
Avalanche Airbag cannot prevent an ava-
lanche.
a Every avalanche is always absolutely life threatening,
with or without an ABS
®
Avalanche Airbag.
a The ABS
®
Avalanche Airbag should not in any way
increase your willingness to take risks.
a The function and action of the ABS
®
System is limited
solely to preventing the total burial of an avalanche
victim. However, there may be situations when this is
only partially or not at all possible.
a The ABS
®
P.RIDE System must be actively triggered –
either by you or a member of your group if you are in
group mode.
a You should always try to activate your ABS
®
P.RIDE
System yourself by pulling the activation handle.
ABS
®
P.RIDE group activation only allows the additional
option of remote radio-controlled activation of your
ABS
®
P.RIDE System by other group members if you are
in group mode.
a In the event of left-handed assembly (Section 4.1, Step
8), ensure that you do not pull the activation handle
downwards in order to prevent it activating accidentally.
a The ABS
®
P.RIDE system requires careful handling
and proper inspection before each use. Check the day
before use that your system is fully functional and the
battery is fully charged.
a Use only the ABS
®
original inflator for ABS
®
P.RIDE.
a The ABS
®
inflator can only be refilled by ABS
®
.
a The system is only fully functional if a full ABS
®
P.RIDE
inflator is used.
a Try not to dismantle the ABS
®
P.RIDE inflator into its
individual parts. Any manipulation of the inflator could
cause an explosion. Serious risk of injury and death,
even for bystanders!
To Next Page
Loading...