Abus HDCC82500 - DOME SETTINGS

34
SYS INFO
ADDRESS 0
COM FORM 2400, 8, 1
PROTOCOL AUTO MATCH
FIRMWARE 3.22
HARDWARE 1.3
BUILD DATE 150114
Function Description
ADDRESS Displays the dome address (ID)
COM FORM Displays the baud rate, data bit and stop bit
PROTOCOL Displays the current control protocol
FIRMWARE Displays the firmware version of the system DSP
HARDWARE Displays the firmware version of the camera module
BUILD DATE Firmware creation date
DOME SETTINGS
<SYS INFO SETTINGS>
<CAMERA PARAMETER>
<MOTION PARAMETER>
<PRESETS>
<PATROLS>
<TIME TASK>
<PATTERNS>
BACK EXIT
Function Description
SYS INFO SETTINGS Basic system settings such as RS-485 parameters or date/time
settings
CAMERA PARAMETER Settings for picture and zoom
MOTION PARAMETER Control settings (such as preset speed)
PRESETS Configuration of the presets
PATROLS Configuration of the patrols
TIME TASK Setting of schedule-based tasks
PATTERNS Configuration of patterns