33
9. Diagnosis (self-test)
If the camera is connected to a voltage source, it performs a self-diagnosis.
SN
ADDRESS
COM FORMAT
PROTOCOL SELF ADAPTIVE
VERSION
BUILD DATE
Function Description
SN Serial No. display
ADDRESS Displays the dome address (ID)
COM FORMAT Displays the baud rate
PROTOCOL SELF ADAPTIVE Displays the protocol
VERSION Displays the firmware version
BUILD DATE Displays the firmware date
10. OSD menu
To display the OSD menu, call up preset 95. Move the joystick of the control panel up and down
around the cursor position. You can confirm and return to the menu by pressing the IRIS+ button.
MAIN MENU
<SYS INFO>
<DOME SETTINGS>
<RESTORE DEFAULTS>
<RESTORE CAMERA>
<REBOOT DOME>
LANGUAGE ENGLISH
EXIT
Function Description
SYS INFO Displays system information
DOME SETTINGS Camera parameter settings
RESTORE DEFAULTS Restores factory settings
RESTORE CAMERA Resets settings
REBOOT DOME Restarts the dome
LANGUAGE OSD display language (English only)
EXIT Closes the OSD
To Next Page
Loading...
Need help?
General
