Abus IPCS84530 User Manual

82
Type: Camera item number
Serial No.: Camera serial number
Firmware version: Display of the firmware version currently installed
Coding version: Version number of the video encoder
Web version: Version number of the website
Plugin version: Version of the video plugin on the camera
Number of Channels: Typically, only 1 channel is shown for a camera. A number of
camera channels may be available for IP encoders.
Number of HDDs: Display of the number of installed storage media (e.g. microSD
card)
Number of Alarm Input: Number of switching inputs on the camera
Number of alarm outputs: Number of switching outputs on the camera
Memory usage: Internal memory status
Data throughput: Total video and audio bit rate over the network interface (outgoing)
CPU usage: Display of the processor usage of the camera.
7.4 System
7.4.1 Date & time
Time zone: here, select the time zone in which the camera is located.
NTP: tick the box to synchronise the date and time of the camera
with an NTP time server.
Server address: enter the server address or the IP address for the NTP server
here. A standard server is already set up and can be adjusted if
required.
NTP port: enter the NTP port here. The standard port for NTP is 123.
Interval: select an update interval.
Manual: manual setting of date and time. Click in the date/time field to
open a configuration menu.
Synchronise with PC time: use the current PC time currently being used for access (after
saving the settings).

Abus IPCS84530 Specifications

General

Brand	Abus
Model	IPCS84530
Category	Security Camera
Language	English