Abus SECVEST - Page 80

Configuration
80
Number
The number comprises the zone name and the component type
(wired).
Name
Unique name of the zone
Partition
Partition of the individual zone
Type
Type of the individual wired zone
Attributes
Overview of the attributes for the individual wired zone
Delete All (alarm panel only)
1.
Select Delete All.
2.
Confirm the selection with Next.
3.
Confirm the security prompt with Yes to delete the
detector/zone or Back if you are not sure.
Note
The description of the configuration of the zone
name, partition, zone type and zone attributes can
be found after the "IP zones" overview.