Abus SECVEST - Quickstart Guide; Target Audience; Installing Secvest; Configuring Secvest

Quickstart guide
8
Quickstart guide
Target audience
The instructions for installers aim to help navigate the in-
dividual menus of the program interface.
These instructions are aimed at trained technicians that
have taken an ABUS Security-Center GmbH & Co. KG
seminar and acquired the necessary fundamental
knowledge about the following:
• Installing the wireless alarm system.
• Installing peripheral devices for the wireless alarm
system (e.g. detectors, sirens, GSM/GPRS module,
surveillance cameras).
• Configuring peripheral devices for the wireless alarm
system
These instructions for installers provide an overview of
the setting options in the individual menus.
Installing Secvest
The installation of the Secvest wireless alarm system is
described in chapter Mounting/Installation from page 37.
Additional information can be found in the document sup-
plied in the scope of delivery, "Quick Guide FUAA50000".
The installation/user manual can also be downloaded as
a PDF document.
Link to download the document:
www.abus.com/ger/products/FUAA50000
Configuring Secvest
The configuration of the wireless alarm system is de-
scribed in chapter Configuration from page 45.
Secvest function test
After installation and configuration, perform a complete
function test for all systems and components.
Train the user in the basic operation of the system:
• Logging in/out
• Arming/disarming the system
• Operating the Secvest and remote control.
• Create a handover log
Note
Please observe the general notes for user train-
ing.
Provide the user with the user manual and the
quick start guide and, where applicable, these in-
stallation instructions.