Abus TVIP11560 - Page 100

99
English
Security mode
Select the encryption mode of your network.
Encryption type:
Select the encryption type of the network.
Code 1
Enter the network code (password) for accessing the network.
WPS
The WPS function allows you to easily set up a wireless connection from the camera to a
Wi-Fi network.
Enable WPS
Enable the function to use a WPS connection.
PIN code
The PIN code is required for establishing the connection. The default setting is 12345678. Click “Generate”
to generate a new code.
PBC connection
Enable this function if your router has a WPS button.
1. First press the WPS button on the router.
2. Then click “Connect” within two minutes.
3. The W-LAN connection between the camera and the router is established after a short time.
Router PIN code
You can manually establish a WPS connection here by entering the SSID and the router PIN code.
SSID: Enter the SSID of the network you want.
Router PIN code: Enter the router PIN code. Follow the instruction manual of the router
manufacturer for reading the WPS PIN code.
Check whether your router supports the WPS function.
Click “Save” to apply the settings.