Abus TVIP52502 - Page 46

102
A new window appears. Specify here on which days of the wee
k and at which times motion-controlled
recording should take place.
No
w select a week day for motion controlled recording. To store particular time periods, enter a start and
end time. To set up all-day motion-detection, select 00:00 as the start time and 24:00 as the end time.
To apply motion detection for all week days, click the “Sele
ct All” checkbox. To copy motion detection to
other week days, select the week day and click on “Copy”.
To apply the changes, click “OK” and to discard them click on “Cancel”.
Apply the settings made with “Save”.
Linkage Me
thod
Make the
setting here for which action motion detection should be performed.
Normal Linkage
Send Email: You receive an e-mail as notification, act
ivate the checkbox for this to be performed.
Upload to FTP: Activate the checkbox to upload the motion-controlled recording to an FTP server.
Other Linkage
You can switch on the alarm output for when motion is detected.
To switch on
alarm output 1, select “A->1”.
Apply the settings ma
de with “Save”.