82
CONTROLLER 69
PROGRAMMING
SCHEDULE MODE (ON AND OFF)
Sets an on clock-time and an off clock-
time schedule for the devices to follow
daily. Press the up or down button to first
set up an on clock-time to trigger ON
mode, then press the mode button to set
an off clock-time to trigger OFF mode.
Please be sure to set the current clock
time under settings.
When the devices are triggered to
activate, they will run at the level set
in ON Mode. When the devices are
triggered to deactivate, they will run at
the level set in OFF Mode.
The countdown will begin if no buttons
are pressed for 5 seconds. The time left
on the countdown before the next on or
off phase is displayed below the current
level. The devices will not follow this
schedule if you leave this mode. If you
re-enter the Schedule Mode, they will
continue to follow the latest schedule you
have set.
If there is a level set in OFF Mode other
than zero, the devices will run at that level
when triggered to turn off.
To Next Page
Loading...
