85
CALIBRATION TEMPERATURE SETTING
Adjusts the temperature reading the sensor
probe is measuring. Press the up or down
button to increase or decrease the data
figure in 2°F (or 1°C) increments. The
calibration cycle ranges from -20°F to 20°F
(or -10°C to 10°C) and will be applied to the
sensor probe’s measurements.
CALIBRATION HUMIDITY SETTING
Adjusts the relative humidity reading the
sensor probe is measuring. Press the up
or down button to increase or decrease
the data figure in 1% increments. The
calibration cycle ranges from -10% to 10%
and will be applied to the sensor
probe’s measurements.
CONTROLLER 69
PROGRAMMING
To Next Page
Loading...
