28
PROGRAMMING
CHECK FAN ALERT
This icon will flash when the fan’s sensor detects interference to its operation.
Please check the fan for possible issues. If the fan is rotating, it may just be static
pressure resistance and operating as intended. If the fan is not rotating, please
see the warranty page for replacement information. (This feature is only available
on certain model.)
TEMPERATURE ALARM ALERT
This icon will flash when the high or low temperature alarm that you have set has
been triggered.
HUMIDITY ALARM ALERT
This icon will flash when the high or low humidity alarm that you have set has been
triggered.
DISPLAY LOCK ALERT
This icon is visible when the controller has been locked. The icon will flash to alert
you that the controller is locked if you try to change the mode or settings.
ALERT ICONS
On the top left of the display is the alert icon section. Icons may flash when the controller wishes to
alert you that a particular function or alarm is being triggered.
To Next Page
Loading...
