Accu-Chek Aviva Nano User Manual

69
Not enough blood or control
solution was drawn into the
test strip for measurement or
was applied after the test had
started. Discard the test strip
and repeat the test.
The code chip is from an
expired lot of test strips.
Ensure the code chip number
matches the code number
on the test strip container.
Remove the code chip and
enter the set-up mode to
ensure the time and date in
the meter are correct.
Blood or control solution
was applied to the test strip
before the ashing drop
symbol appeared on the
display. Discard the test
strip and repeat the test.
An electronic error occurred
or, in rare cases, a used
test strip was removed and
reinserted. Turn the meter
off and on, or take the
batteries out for 20 seconds
and reinsert them. Perform a
blood glucose or control test.
If the problem persists, call
Accu-Chek Customer Care at
1-800-363-7949.
43604_NanoAv_12hr_Ins_EN.indd 69 11/24/08 11:08:51 AM

Accu-Chek Aviva Nano Specifications

General

Blood Sample Size	0.6 µL
Test Time	5 seconds
Battery Life	Approximately 1000 tests
Dimensions	69 x 43 x 20 mm
Display	LCD
Measuring Range	10-600 mg/dL
Battery	1 x 3V CR2032 lithium battery
Storage Conditions	-25°C to 70°C
Memory	500 test results
Weight	Approx. 40 g (with battery)