33
Chapter 4: Using Your Meter’s Memory ACCU-CHEK Customer Service Center 1-800-858-8072
Transferring Data
1. Install the software according to the instructions.
2. Run the software program and follow the instructions about how
to download information.
Make sure the software is ready to accept data from the meter.
3. Locate the infrared (IR) window on the top of the meter.
4. Locate the IR window on the infrared cable or PDA.
5. Point the two IR windows toward each other. They should be no more
than 4 inches (10 cm) apart.
6. Open the display cover.
7. With the meter off, press SET and MEM at the same time.
Two arrows appear on the meter display while the data is downloading to
your computer. When the download is complete, the meter turns off and
the computer displays a message that the transfer is complete.
Notes:
• If the data did not transfer successfully, call the ACCU-CHEK Customer Care service center.
• To make the most of the download feature, you must set the year, date, and time in your meter.
are Service Center 1-800-858-8072
mory.
or PDA
s and print them out.
or visit
“
Transferring
Data
” prints
65c, 100m, 15k.
Gradient box
behind “Notes”
prints 13c, 20m,
3k to white.
361_26758_Manual_AC_Compact.qxp 6/27/05 11:35 AM Page 33
To Next Page
Loading...
Need help?
General
