11
Chapter 1: Understanding Your New Meter ACCU-CHEK Customer Care Service Center 1-800-858-8072
Setting the Beeper, Year, Time, and Date
Setting the time and date is important if you use the meter’s memory or connect to a computer.
3. Press SET. The last two numbers of the year will flash.
4. Press MEM to change the year, then press SET. The time format
(12h or 24h) will appear. The 24-hour format is known as military
time.
5. Press MEM to select the desired time format, then press SET.
6. Press MEM to change the hour, then press SET.
7. Repeat Step 6 until the minutes, month, and day are set.
8. When the time and date are set and ON (or OFF) appears again,
press to turn off the meter.
1. With the meter off, press SET.
2. Press MEM to turn the beeper
on or off.
(See Notes on following page.)
are Service Center 1-800-858-8072
he
he
• The battery symbol
means the batteries
are low and should be
changed soon.
• If the meter shuts off
after 3 seconds, no
more tests can be run.
“
Setting
the...Date
” prints
100c, 30m, 6k.
361_26758_Manual_AC_Compact.qxp 6/27/05 11:35 AM Page 11
To Next Page
Loading...
Need help?
General
