DC Power and Energy Meters
Chapter 3: Installation - Configuration
parameter set-up via display
3.1 Display panel and keys
3.2 General parameter setup
3.2.1 Key’s function in parameters setup
3.2.2 Configure AcuDC to work with shunt
3.2.3 Configure AcuDC for current
hall effect sensor
3.2.4 Configure AcuDC for current and
hall effect sensor
3.2.5 Clear energy Ah and DI counter
3.2.6 Set backlight brightness
3.2.7 Meter clock setting
3.2.8 Password setting
3.3 AcuDC Communication Setup
3.4 I/O Parameter Setup
3.4.1 AO parameter setting
3.4.2 RO parameter setting
To Next Page
Loading...
