24
5.7 Stop Printing
When the job is finished, shut the system down mechanically first.
1. Stop Feeding
2. Turn Feed Speed Off
3. Lift the Cover and/or turn Transport Off
4. Click on Stop Print
5. Name and store the job as needed
6. Either Quit the Control Panel or start another Job.
7. Right click on the traffic Light Icon and select exit to disconnect the
computer from the printer.
8. Turn the Power to the printer off.
Lifting the Cover or Pressing the Transport Switch will stop all moving
parts and act as an Emergency Stop in case of a problem or jam.
When re-starting, always turn the feed Speed down and the Feeder off
before starting the P4 transport.
To Next Page
Loading...