Manufacturer’s Declaration
We hereby declare that the product of this model corresponds in its design, construction and version
to the relevant and basic health and safety requirements of the following EC regulations: EMC
Directive and Low Voltage Directive. The detailed standards are as follows:
EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3
EN 301 489-1, EN 301 489-3
EN 60335-1, EN 60335-2-95, EN 62233
Final notes
This manual is only used by technical persons who are qualified to carry out the installation.
No given information in this manual can be considered of any interest to the end user.
It is important for the installer to show their clients correct operation using of the opener including
the using of manual disengagement cord.
Inform the owner about the need of a regular and accurate maintenance, especially regarding a
regular check of the safety and reversing devices.
Technical specifications
230-240VAC 50/60Hz
(subject to customer‟s area)
433.92MHz or other on request
To Next Page
Loading...