Basic function introduction
1. Soft start, soft stop. Minimize start-up load on garage door opener and garage door
2. The door will stop during opening when contacting obstruction, and will reverse at least 30cm
during closing when contacting obstruction.
3. Opening & closing force dynamically self-learning. Can make sure the garage door driver will
work steadily in spite of change of door resistance by seasonal variation.
4. Safety resistance adjustable, with a wide range, sensitive and reliable.
5. Overloading force detecting, the door will reverse more than 15 cm automatically when it is
overloaded when closing and will stop when it is overloaded when opening.
6. Low-voltage protection, the process will not perform any action of opening and closing when
voltage is too low, door panel and controller won‟t be damaged.
7. We adopt rolling code transmitter, with billions of codes, won‟t be coincident code or pirated
code.
8. Auto-close function available.
9. Backup battery interface available, in case of power failure.
10. Wall switch interface available.
11. Photocell interface available, the door will change to open when obstruction is detected
while closing.
Special function introduction (optional)
The following functions are made to order in accordance with the special needs of
customers:
1. Flash light feature
2. Pass door protection feature
3. Remote lock function
4. Half-opening function
To Next Page
Loading...