1.[INSERT DVI CABLE IN DVI CONNECTOR]
2.[INSERT POWER CABLE IN POWER
CONNECTOR]
3.[INSERT POWER CABLE IN POWER
CONNECTOR]
1.[AT FIRST CHECK IF 2*PCS SCREW IN THE
COVER IS LOST].
2.[LOCK 4*PCS SCREW (M4*10-B) TO
FASTEN STAND NECK].
1.[INSERT VGA CABLE IN VGA CONNECTOR]
2.[GET BASE FIXTURE AND ASSEMBLE IT TO
STAND NECK]
1.[LET MONITOR STAND]
2.[INSERT POWER CABLE IN POWER
CONNECTOR]
To Next Page
Loading...
