Acer Aspire 1700 Series - Detach the Front Panel; Remove the Audio DJ Board

Chapter 3 59
4. Disconnect the LED ribbon cable from the LED board.
Detach the front panel
1. Disconnect the touch pad ribbon cable.
2. Remove the three screws as shown here.
3. Turn the unit upside down, and then remove the group of FOUR, the group of EIGHT and the group of SIX
screws.
4. And finally the 4 screws on the rear side.
5. Detach the front panel.
Remove the Audio DJ board
1. Disconnect the Audio DJ ribbon cable.