Acer ASPIRE 4820T - Removing the WLAN Module

Chapter 3 53
Removing the WLAN Module
1. See “Removing the Lower Cover” on page 49.
2. Disconnect the two (2) antenna cables from the WLAN Board and remove the one (1) screw to release the
WLAN Board.
NOTE: Cable placement is Black to the TR1 terminal (left) and White to the TR2 terminal (right).
3. Detach and remove the WLAN Board from the WLAN socket.
Step Size Quantity Screw Type
WLAN Board M2.0*3 1