56 Chapter 3
Removing the Keyboard
CAUTION: Using metal tools to remove the Keyboard may cause damage to the outer casing. It is
recommended that you only use your fingers to remove the Keyboard.
1. See “Removing the Battery Pack” on page 46.
2. Remove the 14 securing screws from the lower cover.
3. Turn the computer over and fully open the lid. There are five (5) securing clips that must be released in order to
remove the keyboard.
Step Size Quantity Screw Type
Keyboard
(red callout)
M2.5*6.5 10
Keyboard
(green callout)
M2.5*4L 2
Keyboard
(blue callout)
M2.0*6L 3
To Next Page
Loading...
