Acer Aspire E700 - Special Design Specification

Chapter 1 3
Special Design Specification
CIR & IR blaster • Follow ITE’s pin define to support CIR & IR blaster function for Vista
home premium SKU
• Two IR blasters support
• BIOS needs to have the item to enable/disable this function. The factory
default is disabled (for XP MCE).
All Onboard
Connectors List
• Rear I/O connectors:
• One PS/2 keyboard port
• One PS/2 mouse port
• One parallel port
• One serial port
• One D-sub VGA port
• One RJ-45 LAN port
• Four USB ports (six audio jacks with MIC in and Line in definition)
• One six-pin 1394 port
• Onboard connectors:
• One LGA 775 CPU socket
• Four DDR2 memory sockets
• One PCI Express x16 socket
• One PCI Express x1 socket
• Two PCI slots
• One FDD slot
• Six SATA2 connectors
• Three 2*5 pin Intel FPIO specification USB pin connectors (follow Intel
FPIO standard specification)
• One 2*5 pin Intel FPIO specification microphone-in/headphone-out pin
connector
• One serial port 2*5 pin connector (2
nd
serial port)
• One AUX-in four-pin connector
• One four-pin CPU fan connector
• One three-pin system fan connector with linear circuit
• One two-pin intrusion alarm connector
• One 24-pin + four-pin ATX interface PS3/PS2 SPS connector
• One 2*7 pin front panel IO header
• One 1394 header
• One onboard buzzer
• One two-pin OBR header
• Color management for onboard connector
• Header for CIR & IR blaster function
Description
Thermal Design • Intel MTM technology, default read/write enabled
• CPU overheat (120
o
C) power off protection
• Compliant with Intel FMB 05A, 05B design
• Compliant with Intel 2006 TDP
• Slow boot-up fan speed design