29 Chapter 2
Standard CMOS Features
Date and Time
The Date and Time items show the current date and time set on the computer. If you are running
a Windows OS, these items are automatically updated whenever you make changes to the
Windows Date and Time Properties utility.
SATA Devices
This main board features four SATA connectors supporting four SATA drives. SATA refers to Serial
ATA (Advanced Technology Attachment), the standard interface for the IDE hard drives which are
currently used in most PCs.
Drive A
This item will identify the type of floppy disk drive A that has been installed.
Halt On
This item determines whether the system stops or not if an error occurs during system boot-up.
At defaults All, But Keyboard, the boot will be interrupted for all errors except a keyboard
error.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start-up time. You can not make changes
to these fields.
To Next Page
Loading...
