Chapter 2 17
Power Management Setup
Parameter Description Option
ACPI Suspend Mode Select an ACPI state. S3 (STR)
S1 (POS)
Deep Power Off Mode Enables for disables Deep Power off function (deep power off mode
reserve only certain power for the CMOS battery and remove other
power source such as CPU, memory, WOL function..etc).
Enable
Disabled
Power On by RTC Alarm Enables or disables to boot the system on scheduled date/time. Disabled
Enabled
Power On by PCIE Devices Enables or disables to wake up the system from a power saving mode
through an event on PCI Express device.
Enabled
Disabled
Power On by PCI Devices Enables or disables to wake up the system from a power saving mode
through a Power Management Event (PME).
Enabled
Disabled
Wake Up by PS/2 Keyboard Enables or disables to wake up the system from a power saving mode
using a PS2 keyboard.
Enabled
Disabled
Wake Up by PS/2 Mouse Enables or disables to wake up the system from a power saving mode
using a PS2 mouse.
Enabled
Disabled
Wake Up by USB Keyboard/
Mouse
If enabled, press any key or click the mouse will wake system from S1/
S3 state.
Enabled
Disabled
Restore On AC Power Loss Enables or disables the system to reboot after a power failure or
interrupt occurs.
Off
On
Last State
To Next Page
Loading...
