82 Chapter 5
System Switches and Jumpers
Serial ATA Connectors
The six serial ATA connectors (SATA1-6) is a high-speed Serial ATA interface port. Each connector can
connect to one Serial ATA device.
IMPORTANT:Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may occur
during transmission.
Fan Power Connectors
The fan power connectors (CPUFAN and SYSFAN1-5) support system cooling fan with +12V. When
connecting the wire to the connectors, always note that the red wire is the positive and should be connected to
the +12V; the black wire is ground and should be connected to GND.
IMPORTANT:Fan cooler set with 3 or 4 pins are both available for CPUFAN. SYSFAN1-3 support fan control,
too. You may select how many percentage of speed for the SYS FAN1/2/3 in BIOS.
SATA1~6 stack SATA connect or s
ar e suppo r te d by ICH10R
SATA1 _3
SATA2 _4
SATA5 _6
SYSFAN4/5SYSFAN1/2/3CPUF AN1
SE NS OR
+1 2 V
GND
CONTROL
SE NS OR
+1 2 V
GND
NC
+1 2 V
GND
To Next Page
Loading...
