Chapter 2 19
Frequency Control
Parameter Description Option
D.O.T. Control Enables or disables Dynamic Overclocking Technology (D.O.T.). DOT
detects the load balance of the processor while running programs, and to
adjust the best processor frequency automatically. When the system
detects the CPU is running programs, it will speed up the processor
automatically to make the program run smoothly and faster. When the
CPU is temporarily suspending or staying in the low load balance, it will
restore the default settings instead.
Options include:
• Disabled - DOT is disabled
• Private - First level of overclocking, increases the frequency by 1%
• Sergeant - Second level of overclocking, increases the frequency by 3%
• Captain - Third level of overclocking, increases the frequency by 5%
• Colonel - Fourth level of overclocking, increases the frequency by 7%
• General - Fifth level of overclocking, increases the frequency by 10%
• Commander - Sixth level of overclocking, increases the frequency by
15%
Disabled
Private
Sergeant
Captain
Colonel
General
Commander
SLI-Ready Memory Select the Serial Presence Detect (SPD) profile for SLI-Ready memory
modules.
Disabled
0% CPU OC
1% CPU OC
2% CPU OC
3% CPU OC
4% CPU OC
5% CPU OC
Max CPU OC
Expert
System Clock Mode When set to Manual, allow you to configure the FSB and memory clock
frequency.
Auto
Linked
Manual
FCB Clock (MHz) Sets the FSB frequency depend on CPU ranged from 400 to 2500 MHz.
Any value that is not within this range will have no effect.
400-2500 MHz
Memory Clock (MHz) Sets the memory frequency ranged from 400 to 1400 MHz. Any value that
is not within this range will have no effect.
400-1400 MHz
Adjust CPU Ratio Sets the processor ratio. Available only when the processor supports this
function.
9
6
7
8
To Next Page
Loading...
