12 Chapter 1
• Audio Connectors/Headers
• ATAPI analog line-level stereo outputs for Internal Speaker
• Vertical connector for three mini-audio jacks (Stereo Line In, Stereo LINE Out, Stereo Microphone
In)
• Header for Stereo Line out and Mono Microphone In for front panel cabling option that adheres to
the Intel® Front Panel I/O Connectivity Design Guide
LAN — Realtek8211BL(default) co-lay 8201CL phy
• Integrated 10/100/1000BASE-T transceiver
• Automatic MDI crossover function
• 10/100/1000BASE-T full-duplex/half-duplex MAC
• Support power down mode
• 100-pin LQFP package for 8211BL
• 48-PQFP package for 8201CL
Universal Serial Bus
• 8 USB 2.0 ports support
• Dual stack with RJ-45 back panel connector
• Dual stack with 1394 connector in rear side
• 2 header supporting 2 USB ports for front panel cabling
TSB43AB23PDTG4 Host Controller
• Fully compliant with provisions of IEEE Std 1394-1995 for a high-performance serial bus and IEEE
Std 1394a-2000
• Fully interoperable with FireWire and i.LINK implementations of IEEE Std 1394
• Three IEEE Std 1394a- 2000 fully compliant cable ports at 100M bits/s, 200M bits/s, and 400M
bits/s
• Two general-purpose I/Os
• PHY-link logic performs system initialization and arbitration functions
• Serial ROM interface supports 2-wire serial EEPROM devices
Expansion Slots
• 1 PCI Express x16 Graphics slot support
• 1 PCI Express x1 Graphics slot support
• 2 PCI Local Bus slots Compliant with PCI rev2.3 specification
Back Panel I/O
This product must follow the Standard I/O Shield Template version 1.00. The back
panel I/O consists of the following:
• Dual stack PS/2 KB/MOUSE
• Parallel port
• Serial port
• VGA port
• Dual stack USB ports with 1394 connector
• Dual Stack USB ports with RJ-45 connector
To Next Page
Loading...
