Chapter 3 45
Disassembly Procedure
This section tells you how to disassemble the system when you need to perform system service. Please also
refer to the disassembly video, if available.
CAUTION: Before you proceed, make sure you have turned off the system and all peripherals connected to it.
Aspire M1610/Veriton M261 Disassembly
NOTE: The only physical difference between the two models is the front bezel as shown in the procedures.
1. Place the system unit on a flat, steady surface.
2. Release the Lock-handle then slide the left side door out.
3. Disconnect the VGA&TV&MODEM card.
Aspire M1610
Veriton M261
To Next Page
Loading...
