26 Chapter 1
Front Panel Header
The front panel header (PANEL1) provides a standard set of switch and LED connectors commonly found on
ATX or Micro ATX cases. Refer to the table below for information:
6 +5V 16 Ground
7 Ground 17 Ground
8PWRGD 18-5V
9 +5VSB 19 +5V
10 +12V 20 +5V
ATX12V: ATX 12V Power Connector
Pin Signal Name
1 Ground
2 Ground
3 +12V
4 +12V
Illustration Pin Signal Function Pin Signal Function
1 HD_LED_P Hard disk LED+ 2 FP PWR/SLP *MSG LED+
3 HD_LED_N Hard disk LED- 4 FP PWR/SLP *MSG LED-
5 RST_SW_N Reset Switch 6 PWR_SW_P Power Switch
7 RST_SW_P Reset Switch 8 PWR_SW_N Power Switch
9 RSVD Reserved 10 Key No pin
ATX_POWER: ATX 20-pin Power Connector
Pin Signal Name Pin Signal Name
To Next Page
Loading...
