Chapter 2 43
CPU Features
Parameter Description
Thermal Management
(Thermal Monitor 1)
This item displays CPU’s temperature and enables you to set a safe
temperature to Prescott CPU.
TM2 Bus Ratio This item represents the frequency (bus ratio) of the throttled
performance state that will be initiated when the on-die sensor goes
from not hot to hot).
TM2 Bus VID This item represents the voltage of the throttled performance state
that will be initiated when the on-die sensor goes from not hot to hot.
Limit CPUID Max. to 3 This item can support Prescott CPUs for old OS. Users please note
that under NT 4.0,it must be set “Enabled”, while under WinXP, it
must be set “Disabled”.
No-Execute Memory Protect This item is a security feature that helps you protect your CPU and
operating system against malicious software executing code. This
item is available when CPU supports the feature.
Thermal Management [Thermal Monitor] Item Help
x TM2 Bus Ratio 14x
x TM2 Bus VID 1.3875V Menu Level X
Limit CPUID Max. to 3 [Disabled]
No-Execute Memory Prote
[Disabled]
KLIJ: Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utilitye
CPU Feature
To Next Page
Loading...
