What to do if my Acer Aspire T310 hard disk drive test failed?
If the hard disk drive test failed on your Acer Desktop, enter BIOS Setup and load the default settings. Check the hard disk drive cable, the hard disk drive itself, and the system board.
Why is my Acer Desktop showing a RAM Parity Error?
If your Acer Desktop is showing a RAM Parity Error, enter BIOS Setup to disable the parity check. The issue may also be related to the memory module or the system board.
What to do if Acer Aspire T310 Desktop shows IRQ Setting Error?
To resolve the IRQ Setting Error on your Acer Desktop, load the default settings in Setup. Enter BIOS Setup, set the Reset Resource Assignments of the PnP/PCI Options to Yes, and then reboot the system. You can also try removing all adapter cards that are NOT factory-installed and then reboot the system.
What to do if Acer Aspire T310 Desktop shows IDE Drive error?
If you are experiencing an IDE Drive error on your Acer Desktop, try loading the default settings in BIOS Setup. Also, check the IDE drive jumper, the IDE hard disk drive power, the IDE hard disk drive cable/connection, and the IDE hard disk drive itself.
Details the components and connectors on the front of the computer, illustrated with numbered labels.
Illustrates and labels the various ports and components located on the rear of the computer.
Outlines the various ports, USB capabilities, and network interfaces for connecting devices.
Covers essential pre-setup considerations including location selection and package opening.
Details the process of connecting all external devices and peripherals before powering on.
Provides instructions for powering on the computer and properly shutting it down.
To Next Page
General