3-46 Service and Maintenance
Mainboard Removal
Prerequisite
Upper Case Removal on page 3-36
1. Locate the WLAN antenna cables.
2. Disconnect the main (black) and the auxillary (white) antenna cable connectors and remove
from the guides of the lower case.
Figure 3:65. Removing the Antenna Cables (1 of 2)
3. Pull the auxillary (A) and the main (B) antenna cables to pass through the mainboard holes,
detach the adhesive tapes (C), and then set the antenna cables aside.
Figure 3:66. Removing the Antenna Cables (2 of 2)
To Next Page
Loading...
