3-78 Service and Maintenance
LCD Module Removal
Prerequisite:
Speaker Removal on page 3-59
1. Locate the WLAN antenna cables (see Figure 3:10, page 3-12).
2. Disconnect the main (black) and the auxillary (white) antenna cable connectors and remove
from the guides of the lower case.
Figure 3:119. Removing the Antenna Cables (1 of 2)
3. Pull the auxillary (A) and the main (B) antenna cables to pass through the mainboard holes,
detach the adhesive tapes.
Figure 3:120. Removing the Antenna Cables (2 of 2)
To Next Page
Loading...
