Service and Maintenance 3-83
5. Perform the following:
a. Route the auxillary antenna cable (A, white) by the white line on the left side of the
mainboard until it pass through the mainboard hole (C).
b. Route the main antenna cable (B, black) through the guides and by the white line on the
right side of the mainboard until it pass through the mainboard hole (D).
c. Attach the adhesive tapes to fix the antenna cables on the respective white lines.
Figure 3:128. Routing the WLAN Antenna Cables
6. On the underside of the lower case, continue to route the antenna cables.
Figure 3:129. Connecting the WLAN Antenna Cables
7. Perform step 3 of the WLAN Module Installation on page 3-28.
To Next Page
Loading...
