Machine Maintenance 3-29
Removing the WLAN Module 0
1. Perform the “Removing the Palmrest Module/Upper Case” procedure described on
page 3-19.
2. Remove the adhesive tape securing the WLAN antennas to the heatsink assembly.
Figure 3-36. WLAN Module Antenna Adhesive Tape
3. Unplug the two (2) antenna cables from the WLAN module.
Figure 3-37. WLAN Module Antennas
For reference during machine reassembly, note which cable color
corresponds to the main (black) and auxiliary (white) connectors.
To Next Page
Loading...
