Machine Maintenance 3-47
Removing the LCD Hinges 0
1. Perform the “Removing the LCD Back Cover” procedure described on page 3-44.
2. Perform the “Removing the WLAN Antennas” procedure described on page 3-46.
3. Remove the eight screws securing the left and right LCD hinges to the back cover.
Figure 3-69. LCD Hinge Screws
4. Detach the LCD hinges from the LCD back cover.
Figure 3-70. LCD Hinges
Table 3-69. Screws
Step Screw Quantity Screw Type
LCD Hinge Disassembly M2.5 × L3.5 6
M2 × L3 2
To Next Page
Loading...
