Acer Aspire X1301 - Page 30

22 Chapter 2
MCP Storage Config
Parameter Description Option
SATA Operation Mode Select a SATA operation mode. AHCI
IDE
RAID
Linux AHCI
SATA 0 -- Port 1 ~ 6 Enables or disables the SATA RAID on ports 1 to 6.
This parameter can be configured if the SATA Operation Mode is set to
RAID
Disabled
Enabled
SATA SALP Feature Select a Supports Aggressive Link Power Management (SALP) feature. Off
Partial
Slumber