Chapter 3 55
Removing the Front I/O and Card Reader Boards
1. See “Removing the Side Panel” on page 36.
2. See “Removing the Font Bezel” on page 37.
3. See “Removing the Heat Sink Fan Assembly” on page 38.
4. See “Removing the Processor” on page 40.
5. See “Removing the Optical Drive” on page 42.
6. See “Removing the Hard Disk Drive” on page 44.
7. See “Removing the Memory Modules” on page 51.
8. Disconnect one end of the three USB (1, 2, and 4), audio (2), and 1394 (5) cables from the rear of the I/O
and card reader boards.
To Next Page
Loading...
